I want to block torrent traffic on my network because it is utilizing too much bandwidth and disrupted my network traffic. What port range should I use and what protocol TCP or UDP?
May 30, 2017 uTorrent (Mac) Seeding not working at all.need help! Incoming TCP port: 46311 - connection status: no incoming connections. In your torrent client make sure to set your bittorrent protocol encryption to 'Prefer Encryption' or 'Enable Encryption' (not Disable Encryption or Require Encryption), this will allow you to. Apr 07, 2013 1. Under `Port used for incomming connections', enter any port number. It is best to use a port number above 10000. Mar 22, 2014 Today I'll show you how to speed up your Utorrent download speed, but it does mostly depend on your connection speed from your provider.
Ali Ahmad2 Answers
Manual Incoming Tcp Port Utorrent Mac Download
Blocking Bittorrent is challenging, and can't really be done effectively with port blocks. The standard ports are 6881-6889 TCP, but the protocol can be run on any port, and the peer-to-peer nature of the protocol means that discovering peers that use unblocked ports is simple.
Blocking Bittorrent traffic could be done with a deep-packet-inspection or application firewall, but many Bittorrent clients support encryption that makes DPI less effective.
If you own the network and bandwidth is your big issue, then you would be best served by a bandwidth monitoring solution. Quality-of-service (QOS) control and bandwidth caps for endpoints could limit the impact the Bittorrent users are having on your overall bandwidth, without the cat-and-mouse game of trying to block a particular protocol.
Another approach would be to block the types of connections that Bittorrent requires. As a peer-to-peer protocol, peers outside your network need to connect in. A firewall could prohibit incoming connections to your user subnet, while permitting them to your intended outward-facing services. An IPS could put a threshold on the number of incoming and outgoing connections, since Bittorrent clients need to connect to multiple peers (and have multiple peers connect to them) in order to function.
If your concern is the legality of the shared content (or if you plan on taking any action against your users), then your best defense is a well-written acceptable-use policy outlining the users' responsibility for their actions and forbidding the use of file-sharing software.
Torrent programs can use both TCP and UDP ports.Bad news : you probably don't know torrent proxies that runs on port 80 ? They allow users to redirect their torrent traffic to the regular port 80, so you won't be able to do anything with ports.
Alternative : you could search for a list of popular torrent trackers and ban their IP (eg the most famous French tracker is tracker.t411.me : block it and the problem is solved. Users still can use proxies and VPN, but most of them will be discouraged). Search for torrent proxies too.
protected by Community♦Jan 20 '14 at 22:27
Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
Not the answer you're looking for? Browse other questions tagged firewallsp2ptorrent or ask your own question.
uTorrent is a very powerful program that allows you to download many types of files by simply uploading the torrent file or via magnet link (clicking on the appropriate link will automatically open the software). In today's guide we will see together how to open uTorrent ports in a simple and fast way to be able to make downloads at maximum speed by correctly configuring the home router. We do not waste time any more and immediately go to the point.
Content index
How to find out the port used by uTorrent
The first step to take before you see how to open uTorrent ports is to find the port that the program uses to accept incoming connections. You can do this by simply using the software itself.
Windows
Manual Incoming Tcp Port Utorrent Mac Free
If you use a Windows PC then follow the steps listed below:
- Open uTorrent, click on the Options menu at the top left and choose Settings. Alternatively, you can quickly access the screen by using the CTRL + P key combination.
- Once you have done this, click on Connect and find the port used by uTorrent to connect to the Internet in the field used for the incoming connection.
Mac
In case you were in possession of a Mac, instead, refer to the following steps:
- Open uTorrent and click on Preferences above.
- In the next step, click on the Network tab and mark the number in the field next to the TCP port entry.
How to access the router administration panel
Before seeing how to open uTorrent ports, you need to enter the control panel of your router.
To do this, follow the letter below:
- Open the default browser (eg Chrome, Firefox or Safari) and type 192.168.1.1 or 192.168.0.1 in the address bar.
- Once this is done, a screen will appear asking you to enter a username and password in order to access the configuration panel of the network device. Usually you can use admin and admin or admin and password. However, we advise you to take a look at the label on the back of the router or the instruction manual.
In the event that the addresses indicated a while ago do not work, then you can find out the exact one of your router by following some very simple steps.
Windows
If you have a Windows PC, right-click on the Wi-Fi icon in the notification bar (next to the clock) and choose Settings Open connection and Internet from the small menu that appears. From the window that opens, click on Change connection properties and find the IP address in the IPv4 DNS Server.
Mac
If you use a Mac, instead, go to System Preferences and click on Network. After that, press the name of the connection you are using from the left sidebar and choose Advanced. From here, click on the TCP/IP tab and refer to the Router field to find its address.
How to open uTorrent ports
After following the passages seen a little while ago, at this point we can move on to the main topic of our guide today: how to open uTorrent modem ports. The router must be configured to open the port used by the software to allow it to achieve maximum performance.
As each router model proposes a different administration panel, we will try to be as precise as possible so that the operation can be done quickly and easily. The option to be identified is called port mapping (or port forwarding ). Then you need to create a new rule and set the port used by uTorrent as an internal door and an external door.
To continue, read carefully the steps listed below:
- From the window that opens, click on Add a new IPv4 port mapping that you find under IPv4 port forwarding table.
- After creating the rule, enter the name of the rule that you are creating in the field name, the protocol to use (in this case TCP ) in the protocol, the port number used by uTorrent in WAN port and LAN port and the local IP address the computer you are using in Remote IP Address.
- Once all fields have been filled in correctly, make sure that the switch at the beginning of the rule is ON.
How to test uTorrent ports
After seeing how to open router ports for uTorrent, to make sure that the operation was successful, you can take advantage of a tool integrated into the program.
Windows
On Windows PC, do this:
- Start the software, click on the Options menu at the top and choose Configuration Wizard. You can access the same section faster using the CTRL + G key combination.
- From the screen that appears, make sure that the Band and Network options are checked and that the country closest to yours is set in the appropriate menu.
- Finish the procedure by pressing on Start the tests.
Mac
On macOS, however, follow the steps below:
- Open uTorrent, click on Settings and click on the Network tab.
- Next to the TCP port entry if there is a green light then it means that the operation was successful.
